Features: • Used in the rework and repair of printed circuit boards, computers, cell phones, or other electronics • Easily removes solder from components or pads on a circuit board • Concentrated fine copper braiding utilizes less length of wick for each desoldering application • Made of clean, oxide-free copper wire • Tight weave enables quick “on and off” desoldering • 5’ and 10’ lengths available on static dissipative bobbins in compliance with ESD Association Standard • Leaves a residue that is environmentally safe • Uses flux classification type L0 per IPC J-STD-004B Wire Specifications: Wire Type Width Configuration A Wire 0.025” (±0.003”) 2 strands of 42awg X 16 (total 32 strands), 31 PPI .635mm (±0.08mm) B Wire 0.050” (±0.004”) 4 strands of 42awg X 16 (total 64 strands), 12.5 PPI 1.27mm (±0.10mm) C Wire 0.075” (±0.005”) 6 strands of 42awg X 16 (total 96 strands), 16 PPI 1.90mm (±0.13mm) D Wire 0.095” (±0.007”) 5 strands of 42awg X 24 (120 total strands), 19 PPI 2.41mm (±0.18mm) E Wire 0.117” (±0.008”) 5 strands of 40awg X 24 (120 total strands), 16 PPI 2.97mm (±0.20mm) Bobbin Identification: Width Color Code Letter Signifier .025” Gray A .050” Yellow B .075” Green C EasyBraid expressly warrants that for a period of two (2) years from the date of .100” Blue D manufacture, Quick Braid will be free of defects in material (parts) and workmanship (labor) when stored appropriately and contained within its original container. Each bobbin is .125” Brown E individually stamped with a lot code. A certificate of compliance is available on our website. Made in the United States of America Specifications and procedures subject to change without notice. QUICK BRAID DESOLDERING BRAID 11543 K-TEL DRIVE, MINNETONKA, MN 55343 DRAWING DATE: PHONE: (909) 627-2453 NUMBER January WEBSITE: EASYBRAIDCO.COM Quick Braid 2019 © 2019 DESCO INDUSTRIES INC Employee Owned